Recently a well known coiled tubing company entered wells in Tabasco, Mexico  and worked for days to re-start old oil wells.  However, when they failed Swab Master swab rigs with Tiger Vision were called in. These oil wells had been shut in for 4-5 years, production fell off and they weren’t producing enough to pay to keep them on line.

Swab Master machines with Tiger Vision Electronic Packages completed the job in one day. As a result, the wells started flowing the next day.  Initially they started producing 200 barrels a day and now are producing over 300 barrels of oil a day. Swab Master machines completed the work on 5 oil wells and production soured!

Call or email Mark Overholt at Tiger General LLC  for more information about Swab Master Rigs with the innovative Tiger Vision.

Email mark@tigergeneral.com   or call Mark Overholt at 330 725 4949 x 122 today! See what top quality competitively priced Swab Master machines can do for you. Go now to www.tigergeneral.com.

Hydraulic Swabbing Rig

IF YOU NEED A SWABBING RIG, WHY MESS AROUND WITH CHAIN DRIVE RIGS WHEN YOU CAN OWN THE FINEST #1 OF ALL HYDRAULIC SWABBING RIGS IN THE USA? HERE’S JUST A FEW BENEFITS TO CONSIDER.

TIGER GENERAL HYDROSTATIC WINCHES DELIVER IN EXCESS OF 95% OF MECHANICAL TORQUE EFFICIENCY. A MECHANICAL CHAIN WINCH DRIVE SYSTEM MIGHT PROVIDE HIGHER REDUCTION RATIOS BUT THEY CAN LOOSE UP TO 30-40% OF TORQUE THROUGH REDUCTION DRIVE TRAIN INEFFICIENCIES.

BOTTOM LINE, TIGER WINCH SYSTEMS PROVIDE A SMOOTHER, FAR MORE EFFICIENT SYSTEM TO DELIVER MAXIMUM LINE PULL. YOU GET AT LEAST 15-YEAR DESIGN LIFE BEFORE AN OVERHAUL IS REQUIRED. THEN IT’S EASY AND REASONABLE TO REBUILD AND GO AGAIN. ALL OTHER RIGS RUN ABOUT 5-8 YEARS OR LESS, AND THEN NEED TO BE OVERHAULED. OUR PUMPS AND MOTORS ARE RATED FOR AT LEAST 20,000 HOURS BEFORE AN OVERHAUL IS REQUIRED.

SWAB MASTER REQUIRES VERY LITTLE MAINTENANCE, IN FACT THEY REQUIRE ABOUT HALF THE MAINTENANCE AS ANY OTHER RIG. YOUR SWAB MASTER MACHINE IS WELL ENGINEERED AND FIELD PROVEN TO WORK HARD AND LIVE A LONG PRODUCTIVE LIFE. THE BASIC DESIGN HAS BEEN THE SAME SINCE 1978, BUT GREATLY REFINED FOR LONGER LIFE AND FAR LESS MAINTENANCE. YOUR SWAB MASTER PLUMBING SYSTEM USES ALL PREMIUM COMPONENTS THAT ARE SIZED CORRECT, WELL MOUNTED, AND ROUTED CLEANLY.

WE USE PREMIUM ABSOLUTE FILTERS, THAT FILTER THE FIRST OR SECOND PASS THROUGH. OTHERS USE FILTERS THAT REQUIRE 7-10 TRIPS TO FILTER. WE COOL AND FILTER ABOUT 7 GALLONS PER MINUTE. WE EVEN COOL AND FILTER WHILE IDLING.

WE USE EXPENSIVE CODE 62 HI PRESSURE 4 BOLT “O” RING, AND JIC “O” RING FITTINGS TO MAKE SURE YOU DON’T HAVE LEAKS FOR THE LONG HAUL. NOT CHEAP PIPE FITTINGS. WE USE EXPENSIVE HYDRAULIC STEEL TUBING, THAT IS POWER COATED TO LIVE LONGER THAN HOSES. WHEN WE USE HOSES WE TAKE GREAT CARE NOT TO STRESS THE HOSE ENDS AND INSTALL WITH PREMIUM HANGERS TO PREVENT CHAFFING. 

YOUR SWAB MASTER COMES STANDARD WITH:

• AN EXPENSIVE TIGER GENERAL AUTO SPOOLING DEVICE GREATLY ENHANCED WITH LARGER ALUM BRONZE BUSHING
• DRIP OIL SYSTEM,
• ALUMINUM SHEAVE COVERS TO PREVENT SPLASH
• A DRAIN HOSE
• ROTATABLE SIDE TRUST
• PLASTIC SKID BLOCKS
• HUGE ADJUSTABLE BEARING ENDS FOR PERFECT ALIGNMENT
• A HEAVY DUTY MAST WITH 7”X7”X 1/4″ SQUARE TUBING, STANDARD. (3/8” WALL ON 16,000 FT MODELS) IT IS BOLTED, TO EXTRA LARGE SWING FRAME HINGE.
• THE ENCLOSED LOW SPLASH CROWN SHEAVE IS STANDARD
• YOU GET HUGE 3 ½ X 5” OD CROWN SHEAVE NEEDLE BEARINGS RUNNING ON A SHAFT SLEEVE

GET ALL THE POWER AND SPEED YOU NEED. MORE POWER THAN ANY OTHER RIG, AND FAR MORE USABLE POWER THAN ANY OTHER RIG. JUST TELL US HOW DEEP YOU NEED TO OPERATE, WE’LL DELIVER THE SUPERIOR PERFORMANCE YOU DESERVE.

GET MORE WELLS PER DAY WITH YOUR SWAB MASTER PREMIUM SWABBING RIG. SET UP IS FASTER!

GET IN MOST OF THE TIME WITHOUT A BULLDOZER. ***SEE TIGER VISION.

IF YOU WANT, YOUR SWAB MASTER CAN BE OPERATED EASILY WITH ONLY ONE MAN. IT’S THAT EASY. MOST OF THE CONTRACTORS IN OHIO AND PA TAKE ADVANTAGE OF ONE MAN OPERATION.

** HOWEVER I UNDERSTAND YOU MIGHT WANT A 2 MAN OPERATION. USE THE SECOND

MAN TO KEEP YOUR SWAB MASTER MACHINE “WIPED DOWN” AND KEEP CHECKING THINGS, OR MOW THE GRASS. A SECOND MAN WILL BE NEEDED ON WELLS WITH HIGH WELL “TREES

Why mess around with old fashioned used rigs?

WHICH CENTURY DO YOU WANT TO OPERATE IN?

Tiger General Swab Masters deliver:

More Performance: More pulling power than any other rig, more speed, more usable power, because we deliver at least 92% of the available power to your drum. Everyone else only delivers about 65% to your drum. We deliver 30% more usable power. Burn far less fuel. Slash your operating costs. Which century do you want to operate in?

Reliable, Durable Hydraulic Designs: Family owned, producing swabbing rigs since 1925.

Hydraulic evolutionary improvements since 1978. Clean, efficient plumbing designs. Design life of at least 15 years with proper easy maintenance.

Easier & Cheaper to Maintain: No clutches, chains, chain idlers, extra bearings, counter shafts, or right angle gear boxes. No constant adjustments or old expensive brake bands. You get smooth dependable hydraulic power. Just change the oil & filters in the Spring & Fall.

Lighter Weight, More Compact, Smaller Envelope: Our field proven 21st century design delivers big power, in smaller package, and far less maintenance. it’s easier for one man to operate. rock solid guarantees.

Built-In Weight Indicator: Modern hydraulics pressure relates directly to line pull. See conversation chart full electronics available for; depth, gross & net line pull, line speed. Full electronic packages for depth, line speed, and gross & net loads. Work time. All down-loadable to a laptop.

Tiger General Swab Rig